ATS-825C
Transport case with integrated charging function and programming function,
for transmitters and receivers from the ATS-80 series.
- For simultaneously charging rech. batteries of up to 25 devices
- Each slot with LED for indicating battery charging status
- Mechanical reverse polarity protection
- M…
+ more
Transport case with integrated charging function and programming function,
for transmitters and receivers from the ATS-80 series.
- For simultaneously charging rech. batteries of up to 25 devices
- Each slot with LED for indicating battery charging status
- Mechanical reverse polarity protection
- M…
Productinfos
Supplies
Technical specifications
Services
ATS-825C
Transport case with integrated charging function and programming function,
for transmitters and receivers from the ATS-80 series.
- For simultaneously charging rech. batteries of up to 25 devices
- Each slot with LED for indicating battery charging status
- Mechanical reverse polarity protection
- Matrix LCD
- Transport case with carrying handle, lockable
- Supplied with matching power supply
- Supplied with programming software for ATS-80R and ATS-80T (SYNC function)
Supplied w/o devices.
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Safety Notes and Warning Messages
The unit uses dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Inexpert handling may result in electric shock.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.
Technical specifications ATS-825C
| ATS-825C | |
|---|---|
| Description | transport case |
| Nominal value | 25 devices |
| Type | with charging function |
| Colour | black |
| Suitable for | ATS-80R, ATS-80T |
| Power supply | via encl. power supply |
| Admiss. ambient temp. | 0-40 °C |
| Dimensions | 437 x 170 x 266 mm (charger only) |
| Weight | 5.3 kg |
| Packing unit | 1 |
| Packaging dimensions (W x H x L) | 0.19 x 0.33 x 0.46 m |
| Gross weight | 6.15 kg |
| Net weight | 5.29 kg |
| ATS-825C | |
|---|---|
| EAN code | 4007754273830 |
| Net weight | 5.29 kg |
MONACOR offers more ...
When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.
-
Product & Buying Advice
-
Planning Advice
-
MONACOR Academy
-
Sertronics Helpdesk
Contact & Information
ATS-825C
