STA-1504
4-channel PA amplifier,
with integrated limiter.
- Balanced inputs
- High-pass filter, low-pass filter, can be activated as required for each channel
- Tamper-resistant level adjustment on the rear panel
- 8 Ω bridged operation possible
- LED VU meter and LED per channel for indicating overload (clip)…
+ more
4-channel PA amplifier,
with integrated limiter.
- Balanced inputs
- High-pass filter, low-pass filter, can be activated as required for each channel
- Tamper-resistant level adjustment on the rear panel
- 8 Ω bridged operation possible
- LED VU meter and LED per channel for indicating overload (clip)…
Productinfos
Supplies
Technical specifications
Services
STA-1504
4-channel PA amplifier,
with integrated limiter.
- Balanced inputs
- High-pass filter, low-pass filter, can be activated as required for each channel
- Tamper-resistant level adjustment on the rear panel
- 8 Ω bridged operation possible
- LED VU meter and LED per channel for indicating overload (clip)
- Soft start
- Ground lift switch
- Speaker switch-on delay
- Fan cooling
- Protected against short circuit, overheating and DC voltage overlay at the outputs
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com
Warning and Safety Instructions
The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.
Technical specifications STA-1504
STA-1504 | |
---|---|
Peak output power | 900 W |
Power rating | 640 W |
Power rating at 4 Ω | 4 x 160 W |
Power rating at 8 Ω | 4 x 100 W |
Power rating with 8 Ω bridged operation | 2 x 320 W |
Channels | 4 |
Inputs | 0.7 V/20 kΩ |
Frequency range | 12-20,000 Hz |
Crossover network | yes |
Crossover frequency | 240 Hz |
Integrated limiter | yes |
S/N ratio | > 80 dB |
Crosstalk attenuation | > 60 dB |
THD | < 0.1% |
Power supply | ˜ 230 V/50 Hz/1,200 VA |
Mains voltage | ~ 230 V |
Mains frequency | 50 Hz |
Power consumption, operation | 1,200 VA |
Admiss. ambient temp. | 0-40 °C |
Width | 482 mm |
Height | 132 mm |
Depth | 310 mm |
Rack units, RU | 3 |
Weight | 14 kg |
Connections |
4 x 3-pole XLR, bal. 4 x screw terminal |
Packaging dimensions (W x H x L) | 0.43 x 0.23 x 0.51 m |
Gross weight | 15.84 kg |
Net weight | 14.6 kg |
STA-1504 | |
---|---|
EAN code | 4007754184457 |
Net weight | 14.6 kg |
Downloads
Product data sheet | |
Instruction manual |
MONACOR offers more ...
When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.
-
Product & Buying Advice
-
Planning Advice
-
MONACOR Academy
-
In-house Repair Service