DSM-48DT

Order No.: 25.7790

Convenient audio management within a network ...
Due to the Dante® interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante® audio network. Both of the Dante® signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one…

+ more
EUR 979,00
RRP *
Buy at B2B shop
*
Important Notice: The retail prices shown here are non-binding recommendations that retailers can charge their customers. They are not part of any specific offer or advertisement. These prices include all charges as well as VAT, but do not cover any additional delivery and shipping costs. Our latest price lists for the retail market include all applicable delivery and payment terms for retailers.
Productinfos
DSM-48DT
Convenient audio management within a network ...
Due to the Dante® interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante® audio network. Both of the Dante® signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one stereo audio signal or two mono audio signals from other Dante®-enabled devices which are located in the same subnetwork and to process this/these in the same way as an analogue signal or AES/EBU signal.
Speaker management systems featuring analogue inputs as well as outputs and additionally provide a Dante® interface are called Breakout Boxes. In order to use the DSM-48DT as a receiver unit, it has to be connected to at least one Fast Ethernet switch (100 Mbps Ethernet).
Digital speaker management system,
with Dante® module.
  • 4 analogue inputs and 8 analogue outputs (XLR, balanced)
  • AES/EBU digital input, stereo
  • 2 Dante® channels
  • 64-bit DSP, sampling rate: 96 kHz
  • Dynamic range: > 118 dB
  • Latency: 0.64 ms
  • Routing via fader for user-defined routing of the inputs to the outputs
  • Audio transmission over Ethernet via Dante® protocol
  • Graphical user interface, PC editing software (devices will be identified automatically)
  • 80 user presets can be stored
  • Remote control via USB or TCP/IP LAN
  • Dot matrix display with 2 x 16 characters
  • VU meter with 4 LEDs for each channel, level display and peak
  • 482 mm (19") rack installation, 1 RS
Input (data for each channel)
  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute
Output (data for each channel)
  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute
  • Routing mix for level adjustments via routing fader
  • Selectable phase (invert, 180°)
Supplies Technical specifications

Technical specifications DSM-48DT

DSM-48DT
Type digital speaker management system
Frequency range 10-40,000 Hz
Control range -
Control frequencies -
Input signal 11 V max.
Input sensitivity -
Input impedance -
Output signal 4 V max.
Output impedance -
Gain -
Phantom power -
Compression -
Gate ratio -
Crossover frequency -
High-pass filter -
Low cut -
Transmission ratio -
S/N ratio >110 dB
Channel separation -
THD <0,005%
Admiss. ambient temp. 0-40 °C
Power supply ~ 230 V/50 Hz/15 VA
Dimensions 482 x 44 x 185 mm, 1 RS
Weight 2,3 kg
Inputs 4 x XLR, bal.
1 x AES/EBU, stereo
1 x RJ45 (LAN)
Outputs 8 x XLR, bal.
Other features USB, LAN
Downloads
Product data sheet
Declaration of conformity
Instruction Manual
sicherheitshinweise
zeichnung
software
Services

MONACOR offers more ...

When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.

Contact & Information

MONACOR INTERNATIONAL offers a high quality and perfectly adapts products to their target groups. Look on our respective brand website to find out what our product brands got in store for you.
Contact