HDR-60/24
Switch-mode power supply, 60 W
- For mounting onto DIN rails TS35, e.g. on distributions boards, meter panels, in fuse boxes or control cabinets
- Universal input voltage: ˜ 85-265 V/47-63 Hz
- Output voltage: DC 24 V/2.5 A
- Low no-load power consumption: 0.3 W
- Fine adjustment of output voltage
- Outp…
+ more
Switch-mode power supply, 60 W
- For mounting onto DIN rails TS35, e.g. on distributions boards, meter panels, in fuse boxes or control cabinets
- Universal input voltage: ˜ 85-265 V/47-63 Hz
- Output voltage: DC 24 V/2.5 A
- Low no-load power consumption: 0.3 W
- Fine adjustment of output voltage
- Outp…
Productinfos
Supplied w/o DIN rail.
Technical specifications
Services
HDR-60/24
Switch-mode power supply, 60 W
- For mounting onto DIN rails TS35, e.g. on distributions boards, meter panels, in fuse boxes or control cabinets
- Universal input voltage: ˜ 85-265 V/47-63 Hz
- Output voltage: DC 24 V/2.5 A
- Low no-load power consumption: < 0.3 W
- Fine adjustment of output voltage
- Output power limitation (LPS)
- LED for indicating operating status
- Protected against short circuit, overload, overvoltage and overheating
- EMC standard EN 61000-6-2
Supplied w/o DIN rail.
Range of applications:
- Home technology, smart home
- Building automation
- Industrial control systems
- Production automation
- Electro-mechanical devices
Safety and warning notices
The appliance is supplied with life-threatening mains voltage. Therefore, never tamper with it yourself and do not insert anything into the ventilation openings. There is a risk of electric shock.
Do not operate the appliance if there is visible damage to the appliance or the mains cable, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialist workshop for repair.
Only use the device indoors and protect it from dripping and splashing water, high humidity and heat (permissible operating temperature range -20 °C to +40 °C).
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
Do not operate the appliance if there is visible damage to the appliance or the mains cable, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialist workshop for repair.
Only use the device indoors and protect it from dripping and splashing water, high humidity and heat (permissible operating temperature range -20 °C to +40 °C).
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
Technical specifications HDR-60/24
| HDR-60/24 | |
|---|---|
| Category | switch-mode power supply |
| Input voltage | ˜ 85-265 V/47-63 Hz |
| Output voltage | DC 24 V |
| Output current | 2.5 A |
| Connections | screw terminals |
| Short-circuit protection | yes |
| Overload protection | yes |
| Overheat protection | yes |
| Admiss. ambient temp. | -30-+70 °C |
| Dimensions | 52.5 x 90 x 58.4 mm |
| Weight | 190 g |
| HDR-60/24 | |
|---|---|
| EAN code | 4007754249552 |
| Net weight | 0.191 kg |
Downloads
 |
Product data sheet |
 |
Product data sheet |
MONACOR offers more ...
When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.
-
Product & Buying Advice
-
Planning Advice
-
MONACOR Academy
-
In-house Repair Service
Contact & Information
HDR-60/24
