DMT-4010RMS
Digital multimeter,
for professional applications.
- True RMS measuring method
- Protected against dust and water according to IP67 when test jacks are covered
- Autoranging for faster measurements
- Resolution: 4,000 digits
- Additional bar graph display
- Voltage measurement: up to DC/˜ 1,000 V
- Curren…
+ more
- True RMS measuring method
- Protected against dust and water according to IP67 when test jacks are covered
- Autoranging for faster measurements
- Resolution: 4,000 digits
- Additional bar graph display
- Voltage measurement: up to DC/˜ 1,000 V
- Curren…
- True RMS measuring method
- Protected against dust and water according to IP67 when test jacks are covered
- Autoranging for faster measurements
- Resolution: 4,000 digits
- Additional bar graph display
- Voltage measurement: up to DC/˜ 1,000 V
- Current measurement: up to DC/˜ 10 A
- Frequency measurement: up to 10 MHz
- Resistance measurement: up to 40 MΩ
- Capacitance measurement: up to 40 mF
- Temperature measurement: -20 °C to +760 °C
- Acoustic continuity test
- Diode test
- Data hold (storage of measured value)
- Peak hold
- Recording of max. value and min. value
- LCD with selectable backlight
- Automatic switch-off
- Overload protection
- Supplied with test leads and protective bag
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com
Wear protective gloves to protect yourself against electric shock. When applying the test tips, make sure that your fingers will be protected behind the collars of the tips. Never perform any measurements when the meter or the test leads are damaged. Always replace damaged test leads with original test leads.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Remove the rechargeable batteries or batteries if the device is not in use for a longer period of time (e.g. more than a week). This avoids possible damage through leaking batteries.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.
Batteries and rechargeable batteries must not be disposed of with household waste. They must be disposed of in accordance with local regulations for hazardous waste.
Technical specifications DMT-4010RMS
| DMT-4010RMS | |
|---|---|
| Display |
21 mm LCD, 3¾ digits, bar graph display |
| Range selection |
automatic, manual |
| Voltage |
5 ranges DC 400 mV-1,000 V ˜ 400 mV-1,000 V |
| Current |
5 ranges DC 400 µA-10 A ˜ 400 µA-10 A |
| Resistance |
6 ranges 400 Ω-40 MΩ |
| Frequency |
4 ranges 4 kHz-10 MHz |
| Capacitance |
8 ranges 4 nF-40 mF |
| Temperature |
1 range -20 °C to +760 °C -4 °F to +1,400 °F type K sensor |
| Admiss. ambient temp. | -10 °C to +50 °C |
| Dimensions |
83 x 180 x 54 mm incl. rubber holster |
| Weight | 430 g |
| Power supply | 9 V battery (not supplied) |
| Special features | peak, min/max, hold, IP67 |
| DMT-4010RMS | |
|---|---|
| EAN code | 4007754214918 |
| Net weight | 0.609 kg |
MONACOR offers more ...
When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.
-
Product & Buying Advice
-
Planning Advice
-
MONACOR Academy
-
In-house Repair Service
Contact & Information
