The preamplifier PREAMP-1UP is connected to the power amplifier AMP-1UP. The cabling can be realised via the main lead, i.e. the signals can be fed through from one unit to the other.
A max. of 20 power amplifiers AMP-1UP can be connected to one preamplifier PREAMP-1UP. The speakers must be connected to the power amplifier AMP-1UP. Two 8 Ω speakers or one 4 Ω speaker can be operated with one power amplifier.
- Designed for transmitting announcements and music conveniently to different rooms
- Individual volume control and switching-off possible in each room
- Compatible with many standard switches
- Suitable for standard 63 mm flush-mounted wall sockets
- For connection to one preamplifier PREAMP-1UP
- Fitted metal base plate
- Incl. level scale and volume sticker
Therefore, the amplifier should always be built-in near the hi-fi system. At greater distances between the sound source or hi-fi system and the preamplifer, it is recommended to use a screened cable for the audio signal. It has to be supplied with DC 24 V.
The preamplifier PREAMP-1UP must be connected to the power amplifier AMP-1UP. The cabling can be realised via the main lead, ie. the signals can be fed through from one unit to the other. A maximum of 20 power amplifiers AMP-1UP can be connected to one preamplifier PREAMP-1UP. Please refer to the basic wiring diagram for the recommendation of cabling. The speakers must be connected to the power amplifier AMP-1UP. Two 8 Ω or one 4 Ω speaker can be operated with one power amplifier. If several speakers are to be connected to one power amplifier AMP-1UP, the signals have to be passed on at each speaker, because the max. cross section for connection of the terminals of the AMP-1UP is 1.0 mm2. A junction box can also be placed. The power amplifiers AMP-1UP must also be supplied with DC 24 V. The cabling must be arranged radially or a junction box must be placed.
The max. cross section for connection of the terminals of the AMP-1UP is 1.5 mm2. Thus, it is only possible to connect one cable at a time.
Technical specifications AMP-1UP
|Line input||5 V max./47 kΩ|
|Input control voltage||DC 0-10 V|
|Line output||10 W at a load of 4 Ω|
|Output control voltage||-|
|Frequency range||45-20,000 Hz|
|Power supply||DC 22-26 V/0.77 A|
|Admiss. ambient temp.||0-40 °C|
|Connections||7-pole terminal strip, |
MONACOR offers more ...
When it comes to quality, MONACOR INTERNATIONAL leaves nothing to chance and relies on its own strengths. Our proactive quality policy ensures the greatest possible security. Accredited test labs support and document tight tolerance limits, and conduct extensive quality assurance checks of our products. This means that you benefit from very high standards of quality – for all products.