MONACOR: Dental Practice

Dental Practice

Flush-mount speakers and surface-mount speakers,
150–280 m²

Technical Project Management

Are you planning a project? Contact us!

projekte@monacor.de

Solution: Dental Practice, 150-280 m2

Customer requirements:

Excellent sound characteristics for the reproduction of music and speech
Unobtrusive music reproduction for a pleasant ambience in the treatment rooms
Volume control per channel for individual adjustment in each room
Microphone station at the reception desk for calling in patients and for general announcements in the waiting area and treatment rooms

Zahnarztpraxis, 150–280 m²

Products used

Build your own set with our configurator...

Solution

Unobtrusive wall speakers ESP-134/WS are used to ensure a pleasant sound in the treatment rooms. The 2-way system with neodymium bass-midrange speaker and tweeter provides a great sound for the reproduction of both speech and music.

Flush-mount speakers EDL-116TW which are installed in the hallway and waiting area allow for a continuous PA application in the entire practice. The class D amplifier PA-1450D provides 4 x 50 W. With the mixer PA-6040MPX, it is possible to implement a multi-room application with an individual control of up to 4 zones. Thus, it is possible for practice staff to direct announcements to one specific room or to a group of zones.

The Bluetooth receiver WSA-10BT provides a wireless connection between a Bluetooth signal source and the PA system. Thus, it is possible to replay files from the Bluetooth signal source on the audio system connected to the WSA-10BT.

Overview
Specifications

ESP-134/WS

Order No.: 1000264

ESP-134/WS

Order No.: 1000264

These wall speakers impress by an extraordinarily flat design which is only achieved by applying the latest NEODYMIUM magnetic systems.

The ESP-130... speaker systems already provide a very pleasant and complete sound and yet, with a total depth of only 38 mm, they are of such a flat design, that they are just as unobtrusive on the wall as a flush-mount speaker.

PA wall speaker

100 V transmission technology via audio transformer with 3 W and 6 W power taps or 4 Ω operation (20 W)
2-way system with neodymium bass-midrange speaker and dome tweeter
White plastic cabinet with protective metal grille
Slimline design for unobtrusive wall mounting

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Active/passive	passive
Transmission technology	100 V or low-impedance
Total power rating	6 W
Power rating (RMS)	6/3 W (100 V) 20 W (4 Ω)
Impedance	4 Ω
Frequency range	80-18,000 Hz
System	2-way
Number of speakers	2
Speaker size	13 cm (5")
SPL	91 dB/W/m
Max. rated SPL	104 dB
Radiation angle/beam angle	H: 100°/V: 60°
Radiation angle, horizontal	100°
Radiation angle, vertical	60°
Housing material	plastic
Colour	white
Mounting device	attachment via screw
Admiss. ambient temp.	0-40 °C
Dimensions	185 x 275 x 38 mm
Width	185 mm
Height	275 mm
Depth	38 mm
Weight	1.25 kg
Inputs	spring-loaded terminal
Packaging dimensions (W x H x L)	0.075 x 0.225 x 0.315 m
Gross weight	1.375 kg
Net weight	1.255 kg

EAN code	4007754276992
Net weight	1.255 kg

Overview
Specifications

EDL-116TW

Order No.: 0163840

EDL-116TW

Order No.: 0163840

PA ceiling speaker

100 V transmission technology
15 cm (6") 2-way coaxial speaker
Metal housing with protective speaker grille
Power taps: 10/6/3/1.5 W
Quick-mounting facility with spring clips
Connection via spring-loaded terminal
For a ceiling thickness from 10 to 40 mm

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Transmission technology	100 V
Frequency range	90-20,000 Hz
Power rating (RMS)	10/6/3/1.5 W
SPL	92 dB/W/m
Max. rated SPL	102 dB
Mounting cutout	Ø 166 mm
Mounting depth	55 mm
Dimensions	Ø 195 mm x 55 mm
Outside diameter	Ø 195 mm
Width	Ø 195 mm
Height	Ø 195 mm
Depth	55 mm
Colour	white
Admiss. ambient temp.	0-40 °C
Weight	0.82 kg
Packing unit	1
Type of speaker	150
Packaging dimensions (W x H x L)	0.215 x 0.07 x 0.215 m
Gross weight	0.918 kg
Net weight	0.821 kg

EAN code	4007754266436
Net weight	0.821 kg

Overview
Specifications

PA-1450D

Order No.: 0172950

PA-1450D

Order No.: 0172950

4-channel class D PA amplifier

4 x 50 W
Class D concept with a high efficiency to reduce energy costs
Requires lower rechargeable battery capacity for emergency power operation than 100 V analogue amplifiers
Clearly reduced cooling requirements due to low heat dispersion
Silent operation due to fanless cooling concept
Mute function for each channel
Level control for each channel
LED indication for clip and protect for each channel pair
Protected against short circuit
Mains operation or 24 V emergency power operation

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Safety Notes and Warning Messages

The unit uses dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Inexpert handling may result in electric shock.
During operation, there may be a hazard of contact with a dangerous voltage of up to 100 V at the speaker terminals. Always switch off the amplifier before making or changing any connections.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated inside the unit must be dissipated by air circulation; never cover the air vents of the housing.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.

Peak output power	200 W
Power rating	200 W
Power rating at 4 Ω	4 x 50 W
Power rating at 100 V	4 x 50 W
Power rating at 70 V	4 x 50 W
Output impedance	4 Ω, 70/100 V
Channels	4
Inputs	1 V/20 kΩ unbal. 550 mV/20 kΩ bal.
Frequency range	10-20,000 Hz
S/N ratio	63 dB
THD	< 0.5%
Power supply	˜ 230 V/50 Hz/300 VA, DC 24 V/9 A
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	300 VA
Operating voltage (possible alternative)	DC 24 V
Power supply (possible alternative)	DC 9 A
Admiss. ambient temp.	0-40 °C
Width	483 mm
Height	90 mm
Depth	330 mm
Rack units, RU	2
Weight	11 kg
Connections	4 x XLR input, bal. 4 x RCA input screw contacts (speakers)
Packaging dimensions (W x H x L)	0.41 x 0.17 x 0.57 m
Gross weight	13.33 kg
Net weight	11.36 kg

EAN code	4007754235258
Net weight	11.36 kg

Overview
Specifications

PA-6040MPX

Order No.: 0174760

PA-6040MPX

Order No.: 0174760

4-zone mixer,

for general multi-room PA applications.

4 zones with user-defined routing of all input channels
4 inputs microphone/line via comb. jacks
2 inputs line stereo via RCA jacks
Each input channel with gain control, 2-way tone control and zone routing switch
Microphone inputs with 15 V phantom power, to be activated as required
Independent paging input, can be routed to each zone
4 zone outputs, can be adjusted individually
Monitor output and record output
Each microphone/line input with connection for external chime button, 2-tone chime or 4-tone chime or siren (selectable)
Connection for push-to-talk microphone PA-4000PTT
Optional connection for up to 32 zone paging microphones PA-4000RC
Level control via zone VU meter
Mains operation or 24 V emergency power operation

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Warning and Safety Instructions

The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.

Channels	6
Zones	4
Inputs	2.5 mV/5 kΩ, bal., 250 mV/15 kΩ, bal. (mic/line), 250 mV/15 kΩ (line), 250 mV/10 kΩ (telephone paging)
Frequency range	20-20,000 Hz
Equalizer bass	± 10 dB/100 Hz
Equalizer treble	± 10 dB/10 kHz
S/N ratio	> 65 dB (mic), > 87 dB (line)
THD	< 1%
Phantom power	15 V
Power supply	˜ 230 V/50 Hz/15 VA, DC 24 V/500 mA
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	15 VA
Operating voltage (possible alternative)	DC 24 V
Power supply (possible alternative)	DC 500 mA
Admiss. ambient temp.	0-40 °C
Width	482 mm
Height	90 mm
Depth	305 mm
Rack units, RU	2
Weight	4.4 kg
Connections	4 x combo 6.3 mm/XLR (mic/line), 2 x RCA L/R (line), 4 x 6.3 mm jack (zone inputs), plug-in screw terminal (paging), plug-in screw terminal (chime button), 1 x RJ45 (push-to-talk mic), 4 x XLR (zone outputs), 1 x 6.3 mm jack (monitor), 1 x RCA L/R (record)
Packaging dimensions (W x H x L)	0.395 x 0.17 x 0.55 m
Gross weight	5.77 kg
Net weight	4.47 kg

EAN code	4007754245615
Net weight	4.47 kg

Overview
Specifications

WSA-10BT

Order No.: 0255800

WSA-10BT

Order No.: 0255800

Bluetooth audio receiver,

for playing tracks from mobile audio devices directly on your audio system.

Audio streaming directly from any Bluetooth device
Supports aptX for an improved audio quality
Autopairing
Up to 10 paired devices can be stored
Optical and coaxial digital output, analogue line level output
LED status indication
Scope of delivery: wireless audio transmission adapter, plug-in power supply, audio cable 2 x RCA to 3.5 mm stereo jack, connection cable with 3.5 mm stereo plugs

Can the name of the Bluetooth receiver WSA-10BT be changed?

The name of the Bluetooth receiver WSA-10BT can be changed on your smartphone. However, the change of name only applies to the smartphone in use. If you use a different phone, the receiver will be displayed as WSA-10BT again.

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Safety Notes and Warning Messages

The unit uses dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Inexpert handling may result in electric shock.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.

Frequency range	20-20,000 Hz
THD	0.05%
Channel separation	45 dB
Bluetooth	4.0, class 2
Operating range	10 m (typ.) 20 m (clear view)
Profiles	A2DP
Power supply	via encl. power supply
Width	91 mm
Height	25 mm
Depth	57 mm
Weight	60 g
Connections	Outputs: 1 x Toslink, optical/digital 1 x RCA, digital 1 x 3.5 mm stereo jack, analogue
Other features	aptX

EAN code	4007754242799
Net weight	0.176 kg

Overview
Specifications

PA-4000RC

Order No.: 0236010

PA-4000RC

Order No.: 0236010

PA 4-zone paging desktop microphone,

for connection to PA-40120 and PA-6040MPX.

Selection buttons for 4 zones, for activating one or several zones
ALL CALL button for activating all of the 4 zones
Autom. chime via microphone announcement button (talk)
LED status indication for the zone buttons (busy, emergency), power, mic fault, signal and talk
Built-in gooseneck electret microphone
Adjustable microphone sensitivity
Chime can be activated or deactivated as required
24 V power supply via PA-40120 or PA-6040MPX
Two RJ45 jacks for connection to PA-40120, PA-6040MPX or optional power supply and additional microphones PA-4000RC
Supplied with connection module for PA-40120 and PA-6040MPX
Up to 32 x PA-4000RC can be connected to PA-40120 or PA-6040MPX via bus
Supplied with 3 m connection cable (Cat. 5e)

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Safety and warning notices

Only use the device indoors and protect it from dripping and splashing water, high humidity and heat (permissible operating temperature range 0 - 40 °C).
Do not operate the appliance if there is visible damage to the appliance, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialised workshop for repair.
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.

Description	PA desktop microphone
Transmission method	cable
Polar pattern	omnidirectional
Power supply	via PA-40120, PA-6040MPX or optional 24 V power supply
Admiss. ambient temp.	0-40 °C
Weight	0.9 kg
Cable	Cat. 5e, 3 m
Connection	2 x RJ45
Packaging dimensions (W x H x L)	0.16 x 0.18 x 0.375 m
Gross weight	1.202 kg
Net weight	0.9 kg

EAN code	4007754218442
Net weight	0.9 kg

Overview
Specifications

ATT-336PEU

Order No.: 0171400

ATT-336PEU

Order No.: 0171400

Wall-mounted PA volume control with 24 V emergency priority relay

Power rating: 36 W
Attenuation in 10 steps, position 0 is OFF
For 100 V transmission technology
Snow-white plastic front panel and knob
Flush mounting into standard 65 mm wall sockets
Surface mounting with matching housing ATT-300, available at option
Plug-in screw terminal

Manufacturer information:

MONACOR INTERNATIONAL GmbH & Co. KG
Zum Falsch 36
28307 Bremen
Germany
info@monacor.com

Safety Notes and Warning Messages

During operation, there is a hazard of contact with a voltage of up to 100 V at the connection cables. Installation must be carried out by skilled personnel only. Make sure that the power matching is correct. An overload will damage the power amplifier and the attenuator!
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.

Description	wall-mounted PA volume control
Frequency range	50-18,000 Hz
Power rating	36 W
Priority facility	yes
Dimensions	80 x 80 x 67 mm
Mounting depth	45 mm
Weight	234 g
Surface-mounted housing	ATT-300

EAN code	4007754179873
Net weight	0.234 kg

^{stock.adobe.com: photowahn}

Dental Practice

Solution: Dental Practice, 150-280 m2

Solution

You are planning a similar audio solution?