MONACOR: Church

Church

Surface-mount speakers,
950–1300 m²

Sven Schindler

Technical Project Management

schindler@monacor.de

+49 421 4865 351

Solution: Church, 950-1300 m²

Customer requirements:

High-quality sound and music reproduction
Consistent sound radiation, event in difficult acoustic conditions
Frequency-stable radiation of each speaker
Hearing assistance directly to hearing aids or inductive receivers through magnetic induction
Versatile use, e.g. for church service, concert or theatrical performance

Church

Products used:

Build your own set with our configurator...

Solution

PA column speakers ETS-340TW/WS and ETS-120SL/WS provide the perfect sound in a challenging acoustic environment. The slimline design allows for an architecturally unobtrusive installation. No matter whether you are sitting in the first row or last row, the speakers deliver a clear and precise reproduction of speech and music without any acoustic feedback. The splitter PA-24AD is used to transmit the signals to the 120 W mono mixing amplifier PA-900S as well as the class D amplifier PA-1850D.

For inductive transmission of speech and music, we have applied loop amplifi er LA-402. The inductive receiver LR-202 then receives the electromagnetic field which is created by an induction loop and converts it into an audio signal for the audience. The CD-114/BT is used as an audio player which can play both CDs and MP3 files and features an integrated Bluetooth receiver.

Overview
Specifications

ECM-310P

Order No.: 0232430

ECM-310P

Order No.: 0232430

PA desktop microphone,

with gooseneck.

Electret, cardioid polar pattern
Phantom power
ON/OFF switch
3 m connection cable with XLR plug, balanced

Description	desktop microphone
Transmission method	cable
Polar pattern	cardioid
System	electret
Audio frequency range	80-14,000 Hz
Nominal impedance	250 Ω
Sensitivity	8 mV/Pa
S/N ratio	> 55 dB
Power supply	DC 22-48 V, phantom power
Admiss. ambient temp.	0-40 °C
Dimensions	Ø 80 mm x 25 mm (console housing) 200 mm (length of gooseneck)
Weight	380 g
Cable	3 m
Connection	XLR, bal.
Packing dimensions (W x H x L)	0.11 x 0.09 x 0.28 m
Gross weight	0.54 kg
Net weight	0.38 kg

Overview
Specifications

ETS-120SL/WS

Order No.: 0163450

ETS-120SL/WS

Order No.: 0163450

These super slimline speaker systems

are the perfect solution whenever unobtrusive PA technology and a high-quality sound are required at the same time. These slimline array speakers were technically feasible only due to the development of new speaker systems which are a combination of flat cone speakers and magnetostatic drive. For a full range sound reproduction, the application of a subwoofer system is recommended.

Pair of line array design speakers, 4 Ω,

in slimline extruded aluminium cabinets.

Elegant slimline design
Cross-sectional area not much bigger than a 1 Euro coin
New type of speaker systems with magnetostatic drive and flat cone speakers
Very wide bandwidth reproduction with an excellent sound quality
High transmission range due to line array system
Connection via screw terminal
Fine-meshed front grille with fleece lining
Supplied with mounting brackets and connection cables

tools4music 4/2017

“Design speaker, column speaker, array speaker - the ETS-120SL/WS from MONACOR is almost invisible due to its narrow width and depth, despite its height of 1,200 mm. Thus, it is possible to implement unobtrusive PA applications in room corners and well-designed residential or commercial environments. The speaker provides an unobtrusive sound and combined with respective subwoofer support and integration into a controller-optimised setting, the fun is just beginning. You can't see anything, but it is quite impressive when the subwoofer starts to provide a powerful bass combined with the high-resolution speakers ETS-120SL/WS. Not exactly a bargain, but 'invisible speakers' for a stylish lifestyle ambience may actually be an invaluable asset. Therefore, thumbs up for an unobtrusive speaker which provides a great sound just for the ears.”
Pros and Cons
+ fine sound
+ unobtrusive appearance, super slimline design
+ neat workmanship
+ practice-oriented radiation range
+ ultra lightweight
+ supplied with extensive mounting auxiliaries

Active/passive	passive
Total power rating	80 W
Power rating (RMS)	40 W
Impedance	4 Ω
Frequency range	120-20,000 Hz
System	line array speaker
Full range speaker	4 x (20 x 120 mm)
Number of speakers	4
Speaker size	20 x 120 mm
SPL	88 dB/W/m
Max. rated SPL	103 dB
Radiation angle/beam angle	H: 160°/V: 40°
Radiation angle, horizontal	160°
Radiation angle, vertical	40°
Housing material	aluminium
Colour	white
Mounting device	screw-on bracket
Admiss. ambient temp.	0-40 °C
Dimensions	36 x 1,210 x 22 mm
Width	36 mm
Height	1,210 mm
Depth	22 mm
Weight	0.95 kg
Inputs	screw terminal
Packing dimensions (W x H x L)	0.17 x 0.075 x 1.35 m
Gross weight	2.78 kg
Net weight	2.02 kg

Overview
Specifications

ETS-340TW/WS

Order No.: 0162250

ETS-340TW/WS

Order No.: 0162250

The new generation of column speakers from MONACOR:

All the advantages of a column speaker (shape, directional characteristic and mounting) are now combined with an excellent sound quality and a particularly high level stability. With the 2½-way ETS speakers (ETS-360TW/WS) or 3-way ETS speakers (ETS-340TW/WS) in a wooden cabinet with white decorative surface with wood pattern, most varying requirements can be met by these speaker systems, like a very good speech intelligibility and at the same time an optimised music reproduction of the full range.

High-end column speaker,

(indoors), 100 V.

Column speaker in a wooden cabinet of compact size, coated with high-quality foils in decorative wood pattern, 3-way technology with tweeter (25 mm textile dome), clearly extended frequency range compared with standard full range column speakers. The sound is ideally matched to the reproduction of both music and vocals.

4 bass speakers, 2 bass-midrange speakers, 1 tweeter
Spring-loaded terminal with 3 power taps
2 x M8 threaded bushing
Supplied with mounting bracket
Metal front grille

PROSOUND 01/2008

“Unobtrusive design, good workmanship and technology ... really favourable price.”

Active/passive	passive
Transmission technology	100 V
Power rating (RMS)	40/20/10 W
Frequency range	100-19,000 Hz
Bass speaker	4
Midrange speaker	2
Tweeter	1
Number of speakers	6+1
SPL	92 dB/W/m
Housing material	wood
Colour	white
Mounting device	mounting brackets
Admiss. ambient temp.	0-40 °C
Dimensions	95 x 500 x 120 mm
Width	95 mm
Height	500 mm
Depth	120 mm
Weight	3.5 kg
Packing dimensions (W x H x L)	0.17 x 0.2 x 0.61 m
Gross weight	4.16 kg
Net weight	3.76 kg

Overview
Specifications

PA-1414MX

Order No.: 0174770

PA-1414MX

Order No.: 0174770

10-channel PA preamplifier

5 XLR input channels, switchable mic/line
4 input channels, switchable XLR mic/RCA line
2 XLR master outputs
1 record output (master1, master2)
Input channels with level control and output selector switch (master1, master1+2, master2)
Each master output with 2-way tone control
Chime button with priority circuit, remote control possible, 2-tone chime or 4-tone chime, siren (selectable)
1 push-to-talk connection, RJ45, with priority circuit (suitable for PA-4000PTT)
Low cut filter can be activated as required for each microphone input
Priority circuit for channels 2-3
Phantom power for electret microphones can be activated as required for each XLR input channel
Mains operation or 24 V emergency power operation

Channels	10
Inputs	2.5 mV, bal. (mic), 250 mV, bal. (line XLR), 250 mV, unbal. (line RCA)
Frequency range	20-20,000 Hz (-0.5 dB)
Equalizer bass	± 10 dB/100 Hz
Equalizer treble	± 10 dB/10 kHz
S/N ratio	> 60 dB (mic), > 75 dB (line)
THD	< 0.05%
Power supply	˜ 230 V/50 Hz/15 VA, DC24 V/0.5 A
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	15 VA
Operating voltage (possible alternative)	DC 24 V
Power supply (possible alternative)	DC 0.5 A
Admiss. ambient temp.	0-40 °C
Width	482 mm
Height	45 mm
Depth	240 mm
Rack units, RU	1
Weight	2.5 kg
Connections	9 x XLR (mic/line inputs), 4 x RCA L/R (line inputs), 1 x RJ45 (push-to-talk microphone), 2 x XLR (outputs), 1 x RCA L/R (record output)
Packing dimensions (W x H x L)	0.34 x 0.13 x 0.55 m
Gross weight	3.61 kg
Net weight	2.57 kg

Overview
Specifications

PA-1850D

Order No.: 0172960

PA-1850D

Order No.: 0172960

8-channel class D PA amplifier

8 x 50 W
Class D concept with a high efficiency to cut energy costs
Requires a lower rechargeable battery capacity for emergency power operation than 100 V analogue amplifiers
Clearly reduced cooling requirements due to low heat dispersion
Silent operation due to fanless cooling concept
Mute function for each channel
Level control for each channel
LED indication for clip and protect for each channel pair
Protected against short circuit
Mains operation or 24 V emergency power operation

Power rating	400 W
Power rating at 4 Ω	8 x 50 W
Power rating at 100 V	8 x 50 W
Output impedance	4 Ω, 70/100 V
Channels	8
Inputs	1 V/20 kΩ unbal. 550 mV/20 kΩ bal.
Frequency range	10-20,000 Hz
S/N ratio	> 65 dB
THD	< 0.5%
Power supply	˜ 230 V/50 Hz/600 VA, DC 24 V/18 A
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	600 VA
Operating voltage (possible alternative)	DC 24 V
Power supply (possible alternative)	DC 18 A
Admiss. ambient temp.	0-40 °C
Width	483 mm
Height	90 mm
Depth	398 mm
Rack units, RU	2
Weight	18 kg
Connections	8 x XLR input, bal. 8 x RCA input, screw contacts (speakers)
Packing dimensions (W x H x L)	0.47 x 0.17 x 0.58 m
Gross weight	20.45 kg
Net weight	18.17 kg

Overview
Specifications

PA-900S

Order No.: 0172080

PA-900S

Order No.: 0172080

Mono PA power amplifier

1 x 120 W
Silent operation due to fanless cooling concept
2-way tone control
Switchable low cut filter
Speaker outputs via screw terminal contacts
Feed-through output (link)
Mains operation or 24 V emergency power operation
482 mm (19") rack installation with supplied mounting brackets

Peak output power	160 W
Power rating	120 W
Output impedance	4 Ω, 70 V/ 100 V
Channels	1
Inputs	765 mV (line)
Frequency range	50-15,000 Hz
Equalizer bass	± 10 dB/100 Hz
Equalizer treble	± 10 dB/10 kHz
S/N ratio	> 80 dB
THD	< 0.5%
Power supply	˜ 230 V/50 Hz/300 VA, DC 24 V/9 A
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	300 VA
Operating voltage (possible alternative)	DC 24 V
Power supply (possible alternative)	DC 9 A
Admiss. ambient temp.	0-40 °C
Width	482 mm
Height	88 mm
Depth	275 mm
Rack units, RU	2
Weight	9.5 kg
Connections	1 x XLR, screw contacts (line in), 1 x XLR (line out), screw contacts (speakers)
Packing dimensions (W x H x L)	0.33 x 0.16 x 0.52 m
Gross weight	11.31 kg
Net weight	9.86 kg

Overview
Specifications

PA-24AD

Order No.: 0171890

PA-24AD

Order No.: 0171890

10-way PA line splitter

2 separate inputs
Stereo operation or mono operation
Balanced XLR connection for each input and output
Gain control for each output
Peak indication for each input
Mains operation and 24 V emergency power operation

Description	splitter
Frequency range	20-20,000 Hz
Input signal	0.775 V
Input impedance	15 kΩ
Output signal	0.775 V
Output impedance	600 Ω
S/N ratio	> 68 dB
THD	< 0.05%
Admiss. ambient temp.	0-40 °C
Power supply	˜ 230 V/50 Hz/10 VA DC 24 V/0.2 A
Dimensions	482 x 45 x 235 mm, 1 RS
Weight	2.9 kg
Inputs	2 x XLR
Outputs	10 x XLR

Overview
Specifications

CD-114/BT

Order No.: 1000951

CD-114/BT

Order No.: 1000951

CD and MP3 player,

with Bluetooth receiver, USB port and SD card slot.

Bluetooth receiver for wireless connection of laptops, smartphones or tablet PCs
USB storage media can be connected directly
For SD cards (SD/SDHC/SDXC) up to 128 GB (FAT16/FAT32), not included in the scope of delivery
Anti-shock system
Supports ID3 tags
Autoplay function
Pitch control function for CD, SD and USB
Fast forward and rewind
Track programming, 10 tracks possible
Repeat function (repeat 1, repeat all, repeat folder)
Hot key feature
Supplied with infrared remote control
Aux input, 3.5 mm stereo jack
RS-232 interface
230 V mains connection and additional 24 V connection
482 mm (19") rack installation, 1 RU
Audio CD/CD-R/CD-RW/MP3 CD, MP3/WMA/CDDA

Description	CD and MP3 player
Media	CD, MP3, USB, SD
Frequency range	20-20,000 Hz
THD	0.3%
Channel separation	60 dB
S/N ratio	60 dB
Output, analogue	0.8 V
Power supply	˜ 230 V/50 Hz/30 VA
Mains voltage	~ 230 V
Mains frequency	50 Hz
Power consumption, operation	30 VA
Power consumption, standby	9.2 VA
Operating voltage (possible alternative)	24 V
Admiss. ambient temp.	0-40 °C
Dimensions	482 x 44 x 245 mm, 1 RU
Weight	3.27 kg
Connections	1 x RCA L/R 1 x 3.5 mm stereo jack 1 x RS-232
Packing dimensions (W x H x L)	0.325 x 0.125 x 0.598 m
Gross weight	4.23 kg

Overview
Specifications

LA-402

Order No.: 0179160

LA-402

Order No.: 0179160

Active loop amplifier,

with dynamic compressor for setting up an audio induction loop system in large rooms up to 750 m².
Inductive transmission of audio signals allows users of hearing aids with a T-coil or induction loop receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of audio induction loop systems which makes it possible for the user to move freely within the loop.
Audio induction loop systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With audio induction loop systems, an induction loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the induction loop receiver. In the receivers, this voltage is then converted again into an audio signal.

Dynamic compressor
Automatic talkover
Metal loss correction 0-3 dB/oct.
3 mic/line inputs with 40 V phantom power, to be switched on additionally
6.3 mm input for inserting external devices
Integrated SD card reader for reproduction of stored alarm messages
2-way tone control
LED level meter
482 mm (19") rack installation with supplied mounting brackets

Loop current	14 A (peak)
Loop resistance	0.2-2 Ω
Room size	up to 750 m²
Inputs	mic 1.5 mV/6.8 kΩ, XLR, bal. switchable to line 630 mV/10 kΩ, XLR, bal. line 630 mV/4.7 kΩ, RCA, unbal. alarm: 2 screw contacts for connecting a switch
Outputs	loop: 2 screw contacts
Equalizer bass	±10 dB, 100 Hz
Equalizer treble	±10 dB, 10 kHz
Frequency range	50-8,000 Hz
THD	< 1%
Admiss. ambient temp.	0-40 °C
Power supply	˜ 230 V/50 Hz/230 VA
Dimensions	482 x 88 x 280 mm, 2 RU
Weight	6.97 kg

Overview
Specifications

LR-202

Order No.: 0176370

LR-202

Order No.: 0176370

Induction loop receiver,

for receiving audio signals in audio induction loop systems. The electromagnetic field which is created by an induction loop is received by the induction loop receiver and converted into an audio signal. Any number of receivers can be operated within one induction loop.
The unit is suitable for people with and without hearing problems and can be used for various applications:

Hearing aid for the hearing impaired
Operational test of audio induction loop systems
Detection of stray radiation within a loop
Interpretation systems
Lectures in museums, at exhibitions, etc.

3.5 mm mono connection fo headphones ≥ 32 Ω
Volume control
Low cut switch
Belt clip
Power supply via 9 V battery
Dimensions: 60 x 112 x 35 mm
Weight: 60 g

Description	inductive receiver
Suitable for	loop amplifiers, sound reproduction systems
Power supply	9 V battery
Admiss. ambient temp.	0-40 °C
Dimensions	60 x 112 x 35 mm
Weight	60 g
Connections	3.5 mm mono jack
Packing unit	1
Packing dimensions (W x H x L)	0.07 x 0.045 x 0.115 m
Gross weight	0.136 kg
Net weight	0.106 kg

_{stock.adobe.com - rihas}

Church

Solution: Church, 950-1300 m2

Solution

You are planning a similar audio solution?

Solution: Church, 950-1300 m²