DIN rail components are made specifically for use in rail systems. They are usually mounted on DIN rails installed in switch boxes, control cabinets, racks or other closed housings. In PA technology, DIN rail components are often used in amplifiers to simplify wiring and circuit design. This makes it possible to expand or modify (PA) amplifiersand other electronic circuits quickly and easily, without any major conversion work.
Amplifiers and other components for the top-hat rail in short: easy installation and configuration, modular adaptability.
One of the great advantages of DIN rail components in audio technology is their modular design. Because they are mounted on DIN rails, the components can be easily and quickly integrated the into existing circuits.
As an installer or user, modularity in PA technology means that you can select the various components of a system individually and assemble them as required for the desired performance and functionality.
Reasons why modularity can be important in PA technology:
Modularity enables you to adapt to specific needs: by using modular audio components, systems can be tailored precisely to your various requirements and needs. You are no longer dependent on prefabricated, "one size fits all" systems.
Modularity streamlines upgrading and maintenance: modular systems are generally easier to maintain and update, as the replacement of individual components is unproblematic. Without this design, you would have to replace large parts or, in the worst case, the entire system.
Modularity enhances scalability: modular systems can be more easily scaled up or down by adding more components or removing existing ones.
Modularity reduces costs and risks: the ability to customise modular audio systems to meet specific needs means there is less risk of paying for features you don't need. Or paying for additional features that you add later. This reduces the overall costs and the risk of investment decisions.
for installation in control cabinets and other enclosed spaces according to DIN EN 60529
features Class D circuitry: high energy efficiency
switchable in stereo or bridge mode, providing for versatile application
external inputs enable connectivity of audio signals from various sources, while balanced and unbalanced inputs provide additional flexibility
one non-inverting amplifier input and one microphone input
separate volume controls for each channel
High-efficiency green design ensures low power consumption and a long service life
for installation in control cabinets and other enclosed spaces according to DIN EN 60529
features Class D circuitry: high energy efficiency
switchable in stereo or bridge mode, providing for versatile application
external inputs enable connectivity of audio signals from various sources, while balanced and unbalanced inputs provide additional flexibility
one non-inverting amplifier input and one microphone input
separate volume controls for each channel
High-efficiency green design ensures low power consumption and a long service life
DIN EN 60529 is a standard that defines protection classes for electrical devices and electronic equipment. It indicates how well a unit is protected against the ingress of foreign bodies (such as dust) and moisture. This standard is of great importance for installers and expert planners of electrical and electronic systems, as it can help to ensure the reliability and safety of systems.
Modularity can increase the complexity and expense of PA systems. Because, according to tendency, a greater number of decisions must be made and more components installed. This can increase the complexity, especially if you choose high-quality, specialised components. However, we won't desert you when it comes to planning and advice.
With good advice and planning, modular components reduce costs and effort in the long run. However, it is important to carefully consider the specific requirements and needs of an application to determine which type of PA technology modularity is advantageous for you.
powerful 1-channel class D amplifier for installation on DIN rails according to DIN EN 60715
provides one balanced and unbalanced input as well as a microphone input to handle a wide range of audio signals
High-efficiency green design of the amplifier ensures high energy efficiency and thus a low impact on the environment
Despite its power, the EPS30/100V-MI is extremely light and compact, making it easy to install and integrate into control cabinets or other enclosed spaces.
powerful 1-channel class D amplifier for installation on DIN rails according to DIN EN 60715
provides one balanced and unbalanced input as well as a microphone input to handle a wide range of audio signals
High-efficiency green design of the amplifier ensures high energy efficiency and thus a low impact on the environment
Despite its power, the EPS30/100V-MI is extremely light and compact, making it easy to install and integrate into control cabinets or other enclosed spaces.
The DIN EN 60715 standard specifies the requirements for the installation of DIN rail devices. It provides instructions on installation, electrical safety and mechanical load capacity requirements. DIN EN 60715 ensures that DIN rail devices are reliably installed. It is therefore of great importance for installers and expert planners.
DIN-rail components are especially practical in commercial PA technology because they allow for easy and quick installation. DIN-rail components also simplify the ongoing operation of amplifiers and other electronic circuits by enabling easy and quick maintenance. Even larger systems where you install several amplifiers and other electronic circuits can be wired quickly and (time) efficiently thanks to DIN rail components.
specially developed for installation on DIN rails according to DIN EN 60715
compatible with SDHC/SD/MMC card up to 32 GB (FAT32)
featuring 7 binary inputs and outputs that can be used for in/out string triggering
various interfaces for the EIB push-button connection and the DMX interface
equipped with stereo line and headphone outputs
delay function up to 4 hours, can be configured with the free configuration software
firmware update possible
specially developed for installation on DIN rails according to DIN EN 60715
compatible with SDHC/SD/MMC card up to 32 GB (FAT32)
featuring 7 binary inputs and outputs that can be used for in/out string triggering
various interfaces for the EIB push-button connection and the DMX interface
equipped with stereo line and headphone outputs
delay function up to 4 hours, can be configured with the free configuration software
firmware update possible
We love the practical application of DIN rail components because they are so reliable and durable. After all, MONACOR has stood for these values for decades. You can ensure that the components are properly installed and secured when using DIN rails. This in turn contributes to improved operating safety. It is usually not good for PA amplifiers to be moved often or not securely fixed in place. Frequent moving or shaking of the amplifier can cause the internal components to shift or tilt, which can lead to malfunctions or even damage to the circuitry. To maximise the service life and operational reliability of PA amplifiers, it is therefore advantageous that they are securely installed and protected against shock. The housing or cabinet in which a DIN rail amplifier is installed also makes amplifiers potentially more durable as DIN rail components. The housing protects the components from dirt, dust and moisture.
especially developed for installation on TS35 DIN rails such as in the distribution board, on the meter panel, in the fuse box or the control cabinet
suitable for many applications thanks to universal input voltage of ˜85-265 V/47-63 Hz and an output voltage of 24 V DC/2.5 A
low no-load power consumption of <0.3 W; the output voltage is finely adjustable
featuring output power limitation (LPS) and LED operation indicator
Our HDR-60/24 is protected against short circuit, overload, overvoltage and overheating and complies with the EMC standard EN 61000-6-2.
especially developed for installation on TS35 DIN rails such as in the distribution board, on the meter panel, in the fuse box or the control cabinet
suitable for many applications thanks to universal input voltage of ˜85-265 V/47-63 Hz and an output voltage of 24 V DC/2.5 A
low no-load power consumption of <0.3 W; the output voltage is finely adjustable
featuring output power limitation (LPS) and LED operation indicator
Our HDR-60/24 is protected against short circuit, overload, overvoltage and overheating and complies with the EMC standard EN 61000-6-2.
The EMC standard EN 61000-6-2 specifies requirements for the electromagnetic compatibility (EMC) of equipment and systems used in commercial, industrial and residential buildings. This standard provides recommendations for compliance with limits for electromagnetic fields and disturbances to ensure the functionality of electronic systems and human safety. Installers and expert planners should take this standard into consideration when installing or planning electronic devices and systems in these areas of application.
Headergraphik: AdobeStock | Vladimir Zhupanenko
